✦ScienexySCIENCE KNOWLEDGE LIBRARY
scientific_instrument · SCI-REF-010-402

Electrical Resistivity Tomography (ERT) Systems

Electrical Resistivity Tomography uses multiple electrical measurements along a survey line or area to construct images of subsurface resistivity variations.

Explanation

Definition

Electrical Resistivity Tomography (ERT) is a geophysical imaging method that estimates the spatial distribution of subsurface electrical resistivity from a series of electrical measurements.

Scientific Background

A single resistivity measurement provides limited information about underground conditions. ERT collects many measurements using different electrode combinations and processes them through numerical inversion to estimate a two-dimensional or three-dimensional resistivity model.

System Components

NameFunction

Electrode array

Provides electrical contact with the ground at multiple positions.

Multichannel resistivity meter

Controls measurements and records voltage and current.

Switching unit

Selects different electrode combinations.

Survey cable

Connects electrodes to the measurement system.

Inversion software

Estimates a subsurface resistivity model from measured data.

Working Principle

Many apparent resistivity measurements are collected using different electrode configurations. An inversion algorithm compares predicted measurements from a model with observed data and adjusts the model to reduce their differences.

Measurement Outputs

  • Apparent resistivity data

  • Two-dimensional resistivity sections

  • Three-dimensional resistivity models

  • Model misfit or data residual statistics

Array Types

NameDescription

Wenner

Often provides strong signal levels and sensitivity to vertical changes.

Schlumberger

Commonly used for investigations of vertical resistivity variation.

Dipole-dipole

Often useful for detecting lateral resistivity contrasts.

Gradient array

Uses a broad current-electrode arrangement with multiple potential measurements.

Accuracy And Limitations

  • ERT inversion is mathematically non-unique.

  • Resolution decreases in poorly sampled regions and at greater depths.

  • Electrode contact problems can reduce data quality.

  • Results depend on electrode geometry, data quality, and inversion assumptions.

  • Resistivity contrasts do not uniquely identify geological materials.

Practical Applications

  • Groundwater investigation

  • Landslide and slope studies

  • Environmental contamination assessment

  • Geological structure mapping

  • Engineering site investigation

  • Monitoring subsurface changes

Maintenance And Safety

  • Use trained personnel for electrical field measurements.

  • Inspect cables and electrode connections.

  • Record electrode positions and topography.

  • Review data quality before inversion.

  • Report inversion settings and interpretation uncertainty.

Knowledge Check

QuestionAnswer

What does ERT inversion produce?

An estimated spatial model of subsurface electrical resistivity.

Why is ERT interpretation considered non-unique?

Different subsurface models can sometimes produce similar measured electrical responses.

Example or application

A worked example has not yet been added.

Importance

ERT extends conventional resistivity surveying into subsurface imaging, allowing researchers to investigate spatial variations in underground materials and conditions.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Instruments & Methods