✦ScienexySCIENCE KNOWLEDGE LIBRARY
scientific_instrument · SCI-REF-010-515

Eddy Current Testing Instruments

Electromagnetic inspection instruments used to evaluate conductive materials by detecting changes in induced eddy currents.

Explanation

Definition

An eddy current testing instrument uses electromagnetic induction to examine electrically conductive materials for surface or near-surface discontinuities and property variations.

Components

  • Alternating-current signal source

  • Excitation coil or probe

  • Receiving or sensing circuit

  • Signal-processing electronics

  • Display and analysis software

Working Principle

An alternating magnetic field generated by a coil induces circulating electrical currents in a nearby conductive material. Changes in the material or its condition alter the electromagnetic response detected by the probe.

Measured Characteristics

  • Signal amplitude

  • Signal phase

  • Probe impedance

  • Response changes associated with discontinuities or material properties

Types

  • Absolute probe system

  • Differential probe system

  • Reflection probe system

  • Rotating eddy current probe system

  • Array eddy current system

Practical Applications

  • Aircraft component inspection

  • Tube and heat-exchanger inspection

  • Surface crack detection

  • Conductivity measurement

  • Coating thickness evaluation on suitable substrates

Accuracy And Limitations

  • The method is primarily applicable to electrically conductive materials

  • Inspection depth is limited by electromagnetic skin effect

  • Lift-off and probe orientation influence signals

  • Material conductivity and magnetic properties affect interpretation

Safety

The method does not normally require ionizing radiation, but industrial inspection should still follow equipment-specific electrical and workplace safety requirements.

Example or application

A worked example has not yet been added.

Importance

Eddy current testing provides a rapid, non-destructive way to evaluate conductive materials and identify certain surface or near-surface defects.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Instruments & Methods