Hysteresis
Definition
Hysteresis is a characteristic in which the instrument output at a given input depends on the previous history or direction of the input change.
Example
An instrument may indicate slightly different values at the same reference input depending on whether the input was approached from a lower or higher value.
Dead Band
Definition
Dead band is an interval of input values over which a change in input does not produce a detectable change in the instrument output.
Causes
Mechanical friction.
Backlash in mechanical systems.
Magnetic effects.
Material properties.
Electronic circuit characteristics.
Evaluation Concepts
Compare responses at equivalent input values approached from increasing and decreasing directions.
Observe whether output depends on the previous input condition.
Identify input intervals that produce no detectable output change.
Compare observed behavior with the instrument's performance requirements.
Illustrative Example
Reference Input
50 units
Increasing Input Response
50.2 units
Decreasing Input Response
49.8 units
Explanation
The different indications illustrate direction-dependent response. The difference is an illustrative hysteresis-related observation, not a universal instrument specification.
Important Distinction
Hysteresis involves dependence on input history or direction.
Dead band involves an input interval without a detectable output change.
Both characteristics may affect measurement reliability.
Knowledge Check
| Question | Answer |
|---|---|
What makes hysteresis different from dead band? | Hysteresis depends on input history or direction, whereas dead band is an interval in which input changes do not produce detectable output changes. |