✦ScienexySCIENCE KNOWLEDGE LIBRARY
sensor_troubleshooting · SCI-REF-010-610

Sensor Failure and Signal Drift Troubleshooting

Explains common sensor failure patterns and the principles used to assess signal drift and abnormal sensor behavior.

Explanation

Sensor Failure

Definition

Sensor failure occurs when a sensor no longer performs within its specified operating or measurement requirements.

Common Failure Types

NameDescription

Open-circuit failure

An electrical connection path is interrupted.

Short-circuit failure

An unintended low-resistance electrical path affects the circuit.

Sensitivity degradation

The sensor response becomes weaker or changes relative to its input.

Zero shift

The output changes at a reference input.

Intermittent failure

The sensor output becomes irregular or unreliable under certain conditions.

Signal Drift

Definition

Signal drift is a gradual change in sensor output that is not explained by a corresponding change in the measured quantity.

Possible Causes

  • Sensor aging.

  • Temperature variation.

  • Moisture or contamination.

  • Mechanical stress.

  • Electrical instability.

  • Chemical degradation.

Evaluation Principles

  • Review sensor history and operating conditions.

  • Compare the signal with an appropriate reference.

  • Check documented environmental influences.

  • Assess whether the sensor remains within specified performance limits.

  • Refer suspected internal faults to qualified personnel.

Safety

Electrical and industrial sensor systems may operate in hazardous environments. Internal inspection or repair requires authorization and suitable safety controls.

Example or application

A worked example has not yet been added.

Importance

Understanding sensor failure and drift supports early fault recognition and helps protect measurement quality.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Instruments & Methods