Definition
Calibration failure occurs when calibration results do not satisfy predefined technical or acceptance requirements, or when a valid calibration cannot be completed.
Possible Causes
Instrument deterioration.
Incorrect reference selection.
Unsuitable environmental conditions.
Instrument instability.
Incorrect measurement range.
Reference standard problems.
Incorrect configuration.
Unrecognized mechanical or electronic faults.
Corrective Action Framework
Identify and document the calibration deviation.
Assess the effect on the instrument and previous measurement results.
Review reference standards and environmental records.
Investigate potential technical causes.
Arrange authorized adjustment or repair when justified.
Repeat calibration or verification as appropriate.
Document the final status and release decision.
Out Of Tolerance Assessment
Definition
An out-of-tolerance condition occurs when an instrument's observed performance falls outside an applicable specified limit.
Considerations
Applicable tolerance or acceptance criteria.
Measurement uncertainty.
Instrument use since the previous acceptable calibration.
Potential impact on earlier results.
Required customer or laboratory notifications.
Important Note
An instrument that fails calibration should not automatically be assumed to have affected every previous result. The impact must be evaluated using documented evidence and appropriate technical judgment.