Introduction
Ohm's law describes the relationship between potential difference, electric current and resistance for an ohmic conductor under constant physical conditions.
Concept
Voltage equals current multiplied by resistance. Current equals voltage divided by resistance, and resistance equals voltage divided by current.
Shortcut
Place V at the top of the triangle and I and R at the bottom. Cover the unknown quantity to identify the required multiplication or division.
Explanation
The three forms are V = IR, I = V/R and R = V/I. Voltage is measured in volts, current in amperes and resistance in ohms.
Step By Step
Identify the unknown electrical quantity.
Record the two known quantities.
Use the triangle to select the correct equation.
Check that the units are volts, amperes and ohms.
Substitute the known values.
Calculate and check the result.
Examples
A 4 Ω resistor carries a current of 3 A. Voltage = 3 × 4 = 12 V.
A 12 V supply is connected across a 6 Ω resistor. Current = 12 ÷ 6 = 2 A.
A 20 V potential difference produces a current of 5 A. Resistance = 20 ÷ 5 = 4 Ω.
Limitations
Ohm's law applies to ohmic components under conditions where their resistance remains constant.
Some components, such as diodes and filament lamps, have nonlinear current-voltage relationships.
The equation does not replace circuit analysis when several components are connected.
Common Mistakes
Confusing current with voltage.
Multiplying voltage by resistance when calculating current.
Using kilo-ohms as ohms without conversion.
Assuming every electrical component obeys Ohm's law.
Practice
Find the voltage across a 10 Ω resistor carrying 2 A.
Calculate the current through a 24 Ω resistor connected to 12 V.
Find the resistance when voltage is 18 V and current is 3 A.