Introduction
Frequency measures the number of complete cycles per second, while time period measures the time required for one complete cycle.
Concept
Frequency is the reciprocal of time period, and time period is the reciprocal of frequency.
Mnemonic
Remember: 'Frequency Counts; Period Times.' Their relationship is reciprocal: a shorter period means a higher frequency.
Explanation
The equations are f = 1/T and T = 1/f. Frequency is measured in hertz and time period in seconds.
Step By Step
Identify whether frequency or time period is required.
Record the known value.
Use the reciprocal relationship.
Calculate 1 divided by the known value.
Attach hertz or seconds as appropriate.
Check that a larger frequency corresponds to a smaller period.
Examples
A wave completes one cycle in 0.5 s. Frequency = 1 ÷ 0.5 = 2 Hz.
A wave has a frequency of 50 Hz. Time period = 1 ÷ 50 = 0.02 s.
If frequency doubles from 10 Hz to 20 Hz, the time period decreases from 0.1 s to 0.05 s.
Limitations
The reciprocal relationship applies to periodic or repeating motion.
The formula assumes frequency and period describe the same cycle.
For non-periodic signals, a single fixed period may not be defined.
Common Mistakes
Multiplying frequency and period instead of using reciprocals.
Confusing seconds with hertz.
Assuming higher frequency means a longer period.
Forgetting that 1 kHz equals 1000 Hz.
Practice
Find the frequency of a periodic motion with a time period of 0.25 s.
Calculate the period of a 100 Hz signal.
Explain how the period changes when frequency becomes four times larger.