Introduction
Circular motion can be described using both linear quantities and angular quantities. Understanding their relationships makes circular-motion problems easier to organize.
Concept
Angular displacement corresponds to arc length, angular velocity corresponds to tangential velocity, and angular acceleration corresponds to tangential acceleration through the radius.
Mnemonic
Remember: 'Linear Equals Angular Times Radius.' The key relationships are s = rθ, v = rω and a_t = rα.
Explanation
Angular displacement θ is measured in radians, angular velocity ω in rad/s and angular acceleration α in rad/s². The linear quantities are arc length s, tangential speed v and tangential acceleration a_t. The angular and linear relationships use the same radius r.
Step By Step
Identify the angular or linear quantity required.
Record the radius of the circular path.
Convert angular displacement into radians if necessary.
Use s = rθ for arc length.
Use v = rω for tangential speed.
Use a_t = rα for tangential acceleration.
Examples
A point moves through 2 radians on a circle of radius 3 m. Arc length = 3 × 2 = 6 m.
A wheel of radius 0.5 m rotates at 10 rad/s. Tangential speed = 0.5 × 10 = 5 m/s.
A rotating object has angular acceleration 4 rad/s² at radius 2 m. Tangential acceleration = 2 × 4 = 8 m/s².
Limitations
The relationships use radians for angular displacement and angular velocity calculations.
Tangential acceleration is different from centripetal acceleration.
For a rigid rotating body, all points share the same angular velocity but have different linear speeds at different radii.
Common Mistakes
Using degrees directly in s = rθ without conversion to radians.
Confusing angular velocity with tangential velocity.
Assuming all points on a rotating object have the same linear speed.
Confusing tangential acceleration with centripetal acceleration.
Practice
Find the arc length for a radius of 4 m and angular displacement of 3 radians.
Calculate tangential speed for a wheel of radius 0.2 m rotating at 15 rad/s.
Explain why points farther from the centre have greater tangential speed when angular velocity is the same.