Introduction
Torque, also called the moment of force, describes the turning effect produced by a force about an axis or pivot.
Concept
The magnitude of torque equals the force multiplied by the perpendicular distance from the axis to the force's line of action.
Shortcut
Remember: 'Torque = Force × Perpendicular Lever Arm.' The general magnitude relationship is τ = rF sin θ.
Explanation
Here, r is the distance from the pivot to the point where the force is applied, F is the force magnitude, and θ is the angle between the position vector and force. Torque is measured in newton-metres (N·m).
Step By Step
Identify the pivot or axis of rotation.
Identify the applied force and its direction.
Determine the distance from the pivot to the point of application.
Find the angle between the position vector and the force.
Use τ = rF sin θ or force multiplied by perpendicular distance.
Assign a clockwise or anticlockwise sign according to the chosen convention.
Examples
A 10 N force acts perpendicular to a lever arm of 0.5 m. Torque magnitude = 0.5 × 10 = 5 N·m.
A 20 N force acts at 30° to a 2 m position vector. Torque magnitude = 2 × 20 × sin 30° = 20 N·m.
A force whose line of action passes through the pivot produces zero torque about that pivot.
Limitations
The simple formula calculates torque about a specified axis or pivot.
For three-dimensional systems, torque is a vector quantity and its direction must be considered.
The angle must be measured between the position vector and force, not automatically from the horizontal.
Common Mistakes
Using the full lever length instead of the perpendicular distance.
Forgetting the sine of the angle in the general formula.
Measuring the angle from the wrong reference direction.
Confusing torque measured in N·m with energy measured in joules, even though their base units are equivalent.
Practice
Calculate the torque produced by a 15 N perpendicular force applied 0.4 m from a pivot.
Find the torque produced by a 10 N force acting at 30° to a 2 m position vector.
Explain why a force directed through the pivot produces no torque about that pivot.