Introduction
Most materials expand when their temperature increases. The type of expansion depends on the dimension being considered.
Concept
Linear expansion describes a change in length, area expansion describes a change in surface area, and volume expansion describes a change in three-dimensional volume.
Mnemonic
L-A-V: Length, Area, Volume. Remember 1D, 2D and 3D.
Explanation
Linear expansion affects one characteristic dimension, area expansion affects two dimensions, and volume expansion affects three dimensions. For isotropic solids, the area expansion coefficient is approximately twice the linear coefficient, and the volume expansion coefficient is approximately three times the linear coefficient for small temperature changes.
Step By Step
Identify the dimension being measured.
Use linear expansion when the required change is in length.
Use area expansion when the required change is in surface area.
Use volume expansion when the required change is in volume.
For an isotropic solid, remember the approximate coefficient relationship: α, 2α and 3α.
Examples
| Question | Solution |
|---|---|
A railway track becomes slightly longer during hot weather. Which type of expansion is relevant? | Linear expansion. |
A heated metal sheet increases in surface area. Which type of expansion is involved? | Area expansion. |
A heated solid object increases in its overall volume. Which type of expansion is involved? | Volume expansion. |
Limitations
The approximate 1:2:3 coefficient relationship applies to isotropic solids under small temperature changes.
Different materials may expand by different amounts.
Some materials exhibit unusual thermal expansion behavior over certain temperature ranges.
Common Mistakes
Using a linear expansion formula for a volume calculation.
Assuming every material has the same expansion coefficient.
Applying the 1:2:3 relationship to anisotropic materials without checking their properties.
Practice
Classify the expansion of a heated metal wire.
Which expansion coefficient is used for a metal plate's surface area?
For an isotropic solid, how is the volume expansion coefficient approximately related to the linear coefficient?