Introduction
In many gas problems, pressure, volume and temperature change together. The combined gas law provides a convenient relationship between two equilibrium states of a fixed amount of gas.
Concept
For a fixed amount of ideal gas, the ratio of pressure multiplied by volume to absolute temperature remains constant between two equilibrium states.
Shortcut
Remember P-V over T stays constant: PV/T = constant.
Explanation
The combined gas law combines Boyle's law, Charles's law and the pressure law. It allows the unknown final pressure, volume or temperature to be calculated when the other quantities are known.
Step By Step
Identify the initial pressure, volume and temperature.
Identify the known final quantities.
Convert both temperatures to Kelvin.
Keep pressure units consistent between the two states.
Substitute the known values and rearrange the equation.
Check whether the result is physically reasonable.
Examples
| Question | Solution |
|---|---|
A gas occupies 2 L at 100 kPa and 300 K. Find its volume at 150 kPa and 450 K. | P1V1/T1 = P2V2/T2. V2 = (P1 × V1 × T2)/(T1 × P2) = (100 × 2 × 450)/(300 × 150) = 2 L. |
What happens to the volume if pressure and temperature both double for a fixed amount of ideal gas? | The volume remains unchanged because the ratio T/P remains constant. |
Limitations
The amount of gas must remain constant.
The relationship assumes ideal-gas behavior or sufficiently ideal conditions.
Temperature must be expressed in Kelvin.
Pressure values must use the same absolute-pressure units.
Common Mistakes
Using Celsius instead of Kelvin.
Using gauge pressure rather than absolute pressure.
Forgetting to keep the gas amount constant.
Rearranging the formula incorrectly.
Practice
A gas occupies 3 L at 100 kPa and 300 K. Find its volume at 150 kPa and 450 K.
Explain why the combined gas law cannot directly describe a system where gas is added.
Identify which quantities must be expressed in absolute units.