Introduction
Electric current, voltage, and resistance are three closely related quantities used to describe electric circuits.
Concept
Current measures the rate of charge flow, voltage represents electric potential difference, and resistance describes opposition to current.
Mnemonic
Current = Flow, Voltage = Push, Resistance = Opposition.
Explanation
Imagine water flowing through a pipe. Current is similar to the amount of water flowing per second. Voltage is similar to the pressure difference that drives the flow. Resistance is similar to a restriction that makes flow more difficult. This is an analogy, not an exact physical equivalence.
Step By Step
Current (I): remember Flow. Its SI unit is the ampere (A).
Voltage (V): remember Push or potential difference. Its SI unit is the volt (V).
Resistance (R): remember Opposition. Its SI unit is the ohm (Ω).
Use Ohm's law to connect the three quantities for an ohmic conductor under constant physical conditions.
Examples
A current of 2 A means that 2 coulombs of charge pass a cross-section each second.
A 12 V battery provides a potential difference of 12 volts between its terminals.
A resistor opposes current in a circuit.
Limitations
The water analogy is useful for introductory learning but cannot represent every electrical phenomenon, especially alternating current, electric fields, and microscopic charge behavior.
Common Mistakes
Treating voltage and current as the same quantity.
Using ohm (Ω) as the unit of current.
Assuming resistance always remains constant when temperature or other physical conditions change.
Practice
Which quantity is measured in amperes?
What does voltage represent in a circuit?
Which quantity opposes electric current?