Introduction
Ohm's law describes the relationship between voltage, current, and resistance in an ohmic conductor under constant physical conditions.
Concept
Voltage equals current multiplied by resistance. Rearranging the relationship gives formulas for current and resistance.
Shortcut
Cover the quantity you need in the V-I-R triangle: V is above I and R.
Explanation
Place V at the top of an imaginary triangle and I and R at the bottom. Covering V leaves I × R. Covering I leaves V ÷ R. Covering R also leaves V ÷ I.
Step By Step
Identify the known quantities and the quantity being calculated.
Choose the corresponding rearrangement of Ohm's law.
Substitute values using consistent SI units.
Calculate the answer and include the correct unit.
Check whether the result is physically reasonable.
Examples
If V = 12 V and R = 4 Ω, current is I = 12 ÷ 4 = 3 A.
If I = 2 A and R = 5 Ω, voltage is V = 2 × 5 = 10 V.
If V = 9 V and I = 3 A, resistance is R = 9 ÷ 3 = 3 Ω.
Limitations
Ohm's law in this simple form applies to ohmic conductors when relevant physical conditions, particularly temperature, remain constant. Some components have nonlinear current-voltage relationships.
Common Mistakes
Multiplying when division is required.
Confusing current with voltage.
Forgetting that resistance is measured in ohms.
Applying the simple linear relationship to every electronic component.
Practice
A 6 Ω resistor is connected across 12 V. Calculate the current.
A current of 0.5 A flows through a 20 Ω resistor. Calculate the voltage.
A device has 24 V across it and draws 3 A. Find its resistance.