Introduction
Electrical power measures the rate at which electrical energy is transferred or converted. Electrical energy depends on power and the duration of operation.
Concept
Power can be calculated from voltage and current, while energy can be calculated from power and time.
Shortcut
Remember P = VI first; then use E = Pt for energy.
Explanation
The basic power relationship is obtained from the rate of electrical energy transfer. Combining it with Ohm's law gives alternative power formulas. Multiplying power by time gives transferred energy.
Step By Step
If voltage and current are known, use the direct power relationship.
If current and resistance are known, use the current-based power form.
If voltage and resistance are known, use the voltage-based power form.
For energy, multiply power by time.
Use seconds for energy in joules when power is in watts.
Examples
A device operating at 12 V and 2 A has power 24 W.
A 10 Ω resistor carrying 2 A dissipates 40 W.
A 100 W device operating for 10 seconds transfers 1000 J of energy.
Limitations
For alternating-current circuits, the simple product of RMS voltage and RMS current gives apparent power; real power may also depend on power factor.
Common Mistakes
Confusing watts with joules.
Using hours without converting time when the required energy unit is joules.
Applying a direct-current power formula without considering power factor in an AC circuit.
Practice
Calculate the power of a 6 V device drawing 3 A.
Find the energy transferred by a 50 W device operating for 20 seconds.
A 4 Ω resistor carries 3 A. Calculate its power dissipation.