Introduction
Angles describe the amount of rotation between two rays sharing a common endpoint. They are commonly measured in degrees.
Concept
Angles are classified according to their degree measurements, including zero, acute, right, obtuse, straight, reflex and full angles.
Mnemonic
Acute is small, right is exact, obtuse is wide, straight is a line, reflex goes beyond a straight angle, and full is a complete turn.
Explanation
An acute angle is greater than 0° but less than 90°. A right angle measures 90°. An obtuse angle is greater than 90° but less than 180°. A straight angle measures 180°. A reflex angle is greater than 180° but less than 360°. A full angle measures 360°.
Step By Step
Measure or identify the angle.
Compare its measurement with 90°.
Check whether it is below, equal to or above 180°.
Use 360° as the reference for a complete revolution.
Assign the correct angle classification.
Examples
| Problem | Solution | Result |
|---|---|---|
Classify an angle of 35°. | 35° is greater than 0° and less than 90°. | Acute angle |
Classify an angle of 125°. | 125° is greater than 90° but less than 180°. | Obtuse angle |
Classify an angle of 240°. | 240° is greater than 180° but less than 360°. | Reflex angle |
Limitations
The classification depends on the angle's measurement, not the apparent length of its arms in a drawing.
Common Mistakes
Confusing an obtuse angle with a reflex angle.
Calling a 90° angle acute or obtuse.
Assuming the visual appearance of a diagram is always drawn to scale.
Practice
Classify 72°, 90°, 165° and 310°.
What is the measurement of a straight angle?
How many degrees are in one complete revolution?